HN-M-2 Grinding Liquid
HN-M-2 Grinding Liquid
 |
 |
 |
Component:
It is confected by many kinds of surfactants, water-soluble antirust.
Characteristic:
·It is transparent when using. easy to watch the surface.
·It is redolent. It doesnt contain any injurant, will not effect the health of operators.
·Low foam, well cooling, strong, strong in lubricating.
·It is good at cleaning, and can make the machine tool and work pieces clean, and make the grinding wheels more durable. It is hard to be transmutative, it has a long-term use period.
Quality index:
| Item | Index | Test method | |
|---|---|---|---|
| Appearance | Transparent or semitransparent | Eyeballing | |
| PH value | 7.5~9.5 | PH test paper | |
| Defoaming property ml/10min≤ | 2 | GB6144-85 | |
| Surface tension dyn/cm≤ | 40 | BIHR180 boudary Tension meter | |
| Antirust Property 35±2℃ | Cast iron Sheet 24h | qualified | GB6144-85 |
| Lamination Sheet 4h | |||
| Corrosin test 55±2℃ | Cast iron Sheet 24h | qualified | GB6144-85 |
| H62 copper 4h | |||
| LY12 aluminum 4h | |||
Function:
It is used for machinery processing as grinding machine. it is good at anti rust, lubricating, cleaning and cooling, it can be used as dipping anti rust between the procedures.
Directions for use:
Prepare it to be 5~10% consistence by running water and then use.
Packing and storage:
200L、20L plastic drum.Please above 0 ℃ indoor storage.
-
HN-69-1 Emulsification Cutting fluid -
HN-M9 Machining Center Emulsification Cutting fliud -
HN-R1 Grinding & Antirust Emulsification Cutting fliud -
HN-R1A Grinding & Antirust Emulsification Cutting fliud -
HN-R1B Line Cutting Emulsification fliud
-
HN-R1C Copper Wire Drawing fluid
