HN-TS-1 Dehydration Antirust Agent
HN-TS-1 Dehydration Antirust Agent
![]() |
![]() |
![]() |
Component:
This product is highly efficent dewatering agents, rust inhibitors, refined oil was formulated.
Characteristic:
The product has a better ability to remove metal surface water film and adhesion layer of rust on film, and to protect the metal from corrosion.
Quality index:
Item | Index | Test method | |
---|---|---|---|
Appearance | Pale yellow to brown Transparent oily liquid | Eyeballing | |
The dehydration property(s) | Qualified | Q/320400GH031(4.2) | |
Moisture & Hest trial(day)49±1℃ class | 45# STEEL≥7 | Qualified | GB/T2361 |
H62 copper ≥5 | Qualified | ||
Lamination test(day) 49±1℃ | 45# STEE ≥7 | Qualified | Q/320400GH030(4.8) |
Corrosion tset(day)(55±2℃) | 45# STEEL≥7 | Qualified | SH/T0080 |
H62 copper ≥5 | Qualified |
Function:
This product is suitable for cutting, grinding rust after the dehydration process, the zqueous cleaning oil seal process, the workqiece oiled before defore dehydration, steel qickling-after washing-after washing, dewatering liquid water rust.
Directions for use:
After the workpiece after cleaning to wet directly immersed in the oil a little shaking(groove blind holes are required to flip), after about 1 minute out of the box.
Quality standards:
Q/320400GH031-2001
Note:
The bottom of the trough is taper, and fixed with valve, the place 100mm far from the bottom should fix metal net or lacunaris plate, remove the cleaning liquid and dirt at the valve bottom in time while using.
Packing and storage:
200L、20L plastic drum. please above 0℃ indoor storage.