- Emulsification Cutting fluid Series
- Cutting Fluid Series
- Antirust Agent Series
- Cleaning Agent Series
- Car oil series
- Gear oil series
- Industrial lube oil series
- Quenching series
- Coal mine hydraulic bracket special liquid series
- Non-finished products oil series
Fully synthetic gasoline engine oil
Component:
the product uses imported synthetic oil as the base oil, and introduces foreign high-performance additives, the product is specially formulated for most car models in Europe, the United States and Asia. It provides comprehensive engine protection and effectively improves and extends engine life. It is particularly prominent in tems of fuel efficiency, friction loss and durability, meeting the current advanced APISN/ILSAC GF-5 engine lubrication rating standards.
Quality index:
Item
|
Index
|
Test method
|
|||
Product rating |
SN
|
——
|
|||
Viscosity grade (according to GB/T 14906) |
0W/20
|
0W/30
|
0W-40
|
——
|
|
Kinematic viscosity (100℃),(mm²/s) |
5.6~9.3
|
9.3~12.5
|
12.5~16.5
|
ASTM D445
|
|
Low temperature dynamic viscosity .mPa.s(℃) no greater than |
Measured
|
Measured
|
Measured
|
ASTM D5293
|
|
Boundary pumping temperature.℃ not higher than |
—30
|
—25
|
—20
|
ASTM D3829
|
|
Viscosity index not less than |
140
|
145
|
150
|
ASTM D2270
|
|
Flash point (opening) /℃ not lower than |
220
|
230
|
235
|
ASTM D92
|
|
Pour point /℃ not higher than |
-55
|
-50
|
-45
|
ASTM D97
|
|
Foam Properties (FoamPropensity/Foam Stability)(mL/mL) |
24℃ no greater than |
25/0
|
ASTM D892
|
||
93.5℃ no greater than |
150/0
|
||||
Rear24℃no greater than |
25/0
|
||||
Mechanical impurities/% no greater than |
0.01
|
ASTM D473
|
|||
Moisture/% no greater than |
trace
|
ASTM D95
|
|||
Residual carbon(before dosing)% |
report
|
ASTM 4530
|
|||
Sulfate Ash% |
report
|
ASTM D874
|
|||
Total alkali number mg KOH/g |
report
|
ASTM D2896
|
|||
sulfur/% |
report
|
ASTM D4294
|
|||
phosphorus/% |
report
|
IP 149/80
|
|||
calcium/% |
report
|
ISO 2192
|
|||
barium/% |
report
|
ISO 2192
|
|||
Zinc/% |
report
|
IP 117/74
|
Note:
the recommended range, use and precautions
1. 0W-20W,0W-30W can meet the oil and the small amount of exhaust gas turbocharger of Japanese, Korean, and other European and US-based models, 0W-40 displacement for large, heavy vehicles Other models of oil.
2. Before using this oil, put other oil on the net before adding the oil (be careful not to mix it with other oil to prevent the lowering effect).
3. The oil at ambient temperature of about 40 degrees below zero, oil change up to 18,000~20,000km.
Product packaging:
Iron drum 200L packaging, 18L liters in the barrel, keg packaging 4L liters.