HN-77-5 High Pressure Little Foam Cleaning Agent
HN-77-5 High Pressure Little Foam Cleaning Agent
 |
 |
 |
Component:
It is confected by many kinds of surfactant,antirust, agent, assistant additive.
Charateristic:
●Little foam, defoam quickly, used for adding pressure jetting cleaning, It is good for mechanization and continue of cleaning technics.
●It doesn't contain any injurant such as nitrite, soluble glass, it is good for the health of operators.
●It is good at anti rust of steel, cast iron, aluminum, and it has a short-term anti tust of the cleaned parts.
Quality index:
| Item | Index | Test method | |
|---|---|---|---|
| Appearance | Brown yellittle Transparent liquid | Eyeballing | |
| pH Value | 7.5~9.5 | pH test paper | |
| Corrosion test 55±2℃ | Castiron sheet 24h | qualified | GB6144-85 |
| 10#steel sheet 72h | |||
| Antirust property 35±2℃ | Lamination 24h | qualified | GB6144-85 |
| Lamination 4h | No ovious trace | ||
| Cleaning rate %≥3 | 85 | Weight method | |
| Defoaming property ml/10min ≤ | 2 | GB6144-85 | |
Funtion:
It is used for high pressure jet ing cleaning for the machinery oarts made of steel, cast iron, aluminum. The pressure of jet ing is 0.2-0.8Mpa.
Directions for use:
●The use consitence:3~5%.
●Cleaning method: it is used for high pressure jet.
●The temperature of jet cleaning: accord with the oil dirt degree. Generally, normal temperature to 80℃.
Packing and storage:
200L、20L plastic drum. please above 0℃ indoor storage.
-
HN-69-1 Emulsification Cutting fluid -
HN-M9 Machining Center Emulsification Cutting fliud -
HN-R1 Grinding & Antirust Emulsification Cutting fliud -
HN-R1A Grinding & Antirust Emulsification Cutting fliud -
HN-R1B Line Cutting Emulsification fliud
-
HN-R1C Copper Wire Drawing fluid
